How Contract CNC Woodworking Is Priced: From STEP File to Prototype

This article explains how WKidea handles inquiries, quotes and prototypes for contract CNC woodworking. Everything here is based on our own 3-axis CNC setup, and the figures are the standards currently published on our website.

Key points

  • Process: 3-axis CNC subtractive machining.
  • Maximum work size: 600 × 400 mm, thickness up to 70 mm (two-sided machining by flipping).
  • Minimum order: none. A single prototype is fine.
  • CNC programming fee: written from your STEP file, from NT$3,000 for one-sided and NT$6,000 for two-sided machining; three or more sides are quoted separately.
  • Prototype evaluation: 7–10 working days, depending on complexity.
  • Reply time: within 24 hours on weekdays.

How is contract CNC woodworking priced?

The cost has four parts, listed separately on the quote.

ItemHow it is calculated
CNC programmingWritten from your STEP file. From NT$3,000 for one-sided and NT$6,000 for two-sided machining; three or more sides quoted separately.
Machine timeThe one-sided programming fee includes 1 hour of machining. Additional time is charged by the hour.
MaterialCharged per project, depending on wood species and quantity.
3D modelingIf you only have 2D drawings, modeling is quoted separately.

Surface finishing and quantity also affect the quote and are estimated per project.

Why does the number of machined sides affect the price?

On a 3-axis CNC, the tool can only cut from above. If the back of a part also has shapes, pockets or holes, the wood has to be flipped, repositioned and machined again. Each additional side means another program, another setup and another alignment. That is why one-sided and two-sided programming fees differ, and three or more sides need individual review.

Keeping features on one side is usually the most direct way to lower cost.

What should I prepare before asking for a quote?

  1. 3D file: STEP is preferred. STL and OBJ can be sent first so we can check whether they are usable.
  2. Dimensions: overall size, key hole positions, thickness, and the size of any mating parts.
  3. Quantity: prototype quantity and expected production quantity.
  4. Wood species: you can specify one, or we can suggest one based on appearance, hardness, budget and machinability.
  5. Finish and hardware: whether you need chamfers, sanding, waxing, laser engraving, magnets, hardware or packaging.

The more complete the information, the faster we can tell whether it can be made and how long it will take.

Five steps from file to finished part

  1. File submission: STEP file, dimensions, quantity, intended use and wood species.
  2. Machinability review: tool access, thin-wall risk, grain direction and tolerance needs.
  3. Quote and schedule: an initial quote based on material, machine time, finishing and quantity.
  4. Prototype: a physical sample to confirm dimensions, feel and details.
  5. Small-batch production: made to the approved sample, then checked for appearance, dimensions and quantity.

How is wood different from plastic or metal?

Wood has grain direction, moisture content and natural variation. With the same file, strength along the grain and across the grain is not the same, and thin walls and sharp corners crack more easily in some directions. So before quoting we check crack-prone areas and toolpath feasibility, and where needed we suggest changing the grain direction or adding thickness locally before prototyping.

For repeated parts we make simple fixtures to hold each piece in the same position, so every part in a small batch comes out the same size.

FAQ

Can you make just one piece?

Yes. WKidea has no minimum order, and single prototypes are welcome.

I only have a sketch or a concept, not a 3D file. What should I do?

We suggest starting with our Commissioned Design service, where we help turn the concept into a manufacturable model. If you only have 2D drawings, 3D modeling can also be quoted separately.

How large a part can you make?

Up to 600 × 400 mm, with thickness up to 70 mm, machined from both sides by flipping.

Will my design be made public?

No. Client files and parts are not shown publicly without permission.

Do you take orders from overseas?

Yes. We ship overseas, and overseas payment is by PayPal. Please contact us by email.

How to start

Send us your STEP file, main dimensions, expected quantity and preferred wood species. For full details, see Contract Manufacturing, or contact service@wkidea.com.

Written by Willy Kang, founder of WKidea and an officially certified Autodesk Fusion instructor since 2017. WKidea (WKIDEA CO., LTD.) was founded in 2011 in New Taipei City, Taiwan.