After wide boards are cut for furniture, a woodworking shop is left with many long, narrow offcuts. Pieces less than 3 cm wide are mostly treated as scrap. WKidea turns these offcuts into stationery and small objects, to make better use of each log.
Key points
- Wide boards suit furniture; wood narrower than 3 cm is mostly scrap in a woodworking shop.
- WKidea sorts offcuts by size and grain and makes phone case back panels, card wallet stands, desk storage and stationery.
- The process is CAD modeling plus 3-axis CNC subtractive machining, with fixtures holding repeated parts.
- We keep an invoice or proof of origin for all the wood we buy.
Why are offcuts usually thrown away?
It is not that the wood is poor; it is hard to use. It is too narrow to glue up into furniture panels, its lengths vary so it is hard to fit into a fixed production flow, and with hand tools it is hard to clamp and unsafe to work. For a furniture-focused shop, the labor of handling offcuts often costs more than the material itself.
What are offcuts good for?
Objects that are small to begin with. We assign offcuts by size and grain:
- Thin, flat pieces: phone case back panels.
- Short, thick pieces: desk objects such as card wallet stands and paperweights.
- Long, slender pieces: stationery such as pens and utility knife handles.
A small object has a small surface, so a short stretch of attractive grain is enough. Here offcuts are actually at an advantage.
How does CNC make offcuts usable?
The key is workholding and repeatability. For repeated parts we make simple fixtures that hold each offcut in the same position, and the CNC cuts it by program. Every part comes out the same size, and hands stay away from the tool. Modeling on the computer first also lets us work out how many parts fit in a length of wood, which cuts down on waste from trial and error.
Where does the wood come from?
We give priority to Taiwan wood, including wood sold by the Forestry and Nature Conservation Agency, wood from registered suppliers, and wood with traceability certification. We have also long bought discarded Taiwan hinoki from construction waste, as well as driftwood from government-announced open collection periods. We keep an invoice or proof of origin for all the wood we buy.
Are things made from offcuts lower in quality?
No. Offcuts and wide boards come from the same tree; the only difference is size. No two pieces of wood have exactly the same color, grain or scent. These differences are a characteristic of solid wood, not a defect.
Further reading
Display pieces and discontinued items continue their life in our Sustainable Selection. For more about the brand, see About Us.
Written by Willy Kang, founder of WKidea. "Raising log utilization to create value" has been a WKidea principle since 2017.